Lumen VTT
Try the demo Create free account

TV grid calculator

TV battle map grid calculator for D&D

A product-derived preview of Lumen VTT showing phone-friendly player actions, a GM view, and a live table display working together.

Enter your TV's diagonal size and resolution to see how big one grid square is in pixels and how many 1-inch squares fit across the screen. Use the numbers to size your battle map so miniatures and tokens line up with real inches on a TV laid flat or hung on the wall. The calculator runs entirely in your browser, and it is free.

Calculate your TV grid

Screen size
47.9 × 27.0 in
Pixels per inch
80
One grid square
80 × 80 px
Squares that fit
47 across × 26 down

In Lumen VTT, size the room to 47 × 26 squares so each square on the TV comes out at about one inch.

How do you use the TV grid calculator?

Type the TV's diagonal size in inches, pick its resolution, and leave the grid square at 1 inch unless your group uses a different scale. The results update as you type.

  1. Find the diagonal on the TV's spec sheet or box; it measures the visible picture, not the frame.
  2. Choose 1080p, 1440p, or 4K to match the signal you send to the TV.
  3. Read "Squares that fit": that is how many 1-inch squares your map can show across and down.
  4. Build or crop your battle map to that many squares so each square lands at about an inch.

How big is a 1-inch square on common TVs?

Screen width is the diagonal multiplied by 0.8716 on a 16:9 TV. Pixels per inch is the horizontal resolution divided by that width. A 1-inch square needs that many pixels on each side.

16:9 TVScreen size1080p: 1 inch4K: 1 inch1-inch squares that fit
43"37.5 × 21.1 in51 px102 px37 × 21
50"43.6 × 24.5 in44 px88 px43 × 24
55"47.9 × 27.0 in40 px80 px47 × 26
65"56.7 × 31.9 in34 px68 px56 × 31
75"65.4 × 36.8 in29 px59 px65 × 36

The number of squares depends only on the TV's physical size. Resolution changes how sharp each square looks: a 4K TV draws every square with twice as many pixels per side as a 1080p TV of the same size.

Does resolution change how many squares fit?

No. A 55-inch TV is about 47.9 inches wide whether it shows 1080p or 4K, so it fits the same 47 or 48 one-inch squares across. What resolution changes is detail: grid lines, token art, and spell effects look crisper at 4K, which matters most when players lean over a TV laid flat.

If your laptop or streaming stick only sends 1080p, the grid is still the right size; it is just drawn with fewer pixels.

Why does a square come out slightly off one inch?

Two things usually cause it. Many TVs zoom the picture a few percent (called overscan) and crop the edges; turn on the picture setting your TV calls Just Scan, Screen Fit, or 1:1 so every pixel is shown. The other cause is rounding: the screen width is rarely a whole number of inches, so the map is a fraction of a square wider or narrower than the glass.

For most tables a square within a few percent of an inch is indistinguishable from a printed battle mat.

How do you set this up in Lumen VTT?

Lumen VTT shows the battle map on the TV through its live table view while the GM runs the session from a laptop and players act from their phones. To get 1-inch squares, give the room the number of squares the calculator shows, use Align Grid if your map image has its own printed grid, and let the TV view fit the room to the screen. Rotate the map 90 degrees for a TV mounted in portrait.

The full setup, from laying the TV flat to opening the TV view, is on our TV table page.

TV grid questions

Does the calculator work for projectors?

Yes. Measure the diagonal of the projected picture on the table or wall and enter that instead of a TV size.

Can you use bigger squares than an inch?

Yes. Set the grid square to 1.25 or 1.5 inches for larger miniatures or easier reading from across the room; the calculator shows how many of those fit.

Is a 1080p TV good enough for a battle map?

For most tables, yes. A 55-inch 1080p TV gives about 40 pixels per inch, enough for clear grid lines and tokens; 4K mainly adds sharpness up close.

What size TV is best for D&D?

Measure your table first. A TV lying flat should leave room for drinks, dice, and character sheets around it; 43 to 55 inches fits most dining tables, while 65 inches suits larger game tables.

What to notice

Works for any TV

Enter the diagonal from the spec sheet and the resolution; the math is the same for every brand.

Real inches, not guesses

The result tells you how many squares to give your map so each one measures about an inch on the glass.

Made for Lumen and any VTT

The numbers apply to any battle map software; Lumen lets you size the room to match them.

D&D TV table software: put your battle map on a TV How to use a TV as a D&D battlemap without fighting your VTT A VTT for in-person D&D tables Best VTT for in-person D&D: what actually matters at the table A phone-friendly VTT for players at the table

Lumen VTT is an independent virtual tabletop and is not affiliated with Wizards of the Coast or Dungeons & Dragons.